1、 产品对电网功率因素高。
1. The product has a high power factor on the power grid.
中频电源是电压型串联逆变电源，整流一直工作在零度，不调整流，只调逆变，所以功率因素高，无高次谐波。始终≥0.95。
The intermediate frequency power supply is a voltage type series inverter power supply, which operates at zero degrees Celsius without adjusting the rectifier. It only adjusts the inverter, so the power factor is high and there are no higher harmonics. Always ≥ 0.95.
2、无功损耗小。
2. Low reactive power loss.
由于采用串联谐振电路设计无功电流小，使电耗大幅减少。
Due to the use of series resonant circuit design with low reactive current, power consumption is significantly reduced.
3、产品在熔炼过程中始终保持恒功率输出。
3. The product always maintains a constant power output during the melting process.
与并联逆变中频电源相比调功方式不同，并联中频电源是通过调节直流电压，而 威客电竞生产的本产品是调频率，它不受炉料多少影响，在整个熔炼过程中保持恒功率。尤其是熔炼不锈钢、铜、工业硅、铝等不导磁物质时更显示它的优越性。熔化速度快，炉料元素烧损少节能效果更好，降低了铸造成本。
Compared to the parallel inverter intermediate frequency power supply, the power regulation method is different. The parallel intermediate frequency power supply adjusts the DC voltage, while our company's product adjusts the frequency, which is not affected by the amount of furnace material and maintains constant power throughout the entire smelting process. Especially when melting non magnetic substances such as stainless steel, copper, industrial silicon, aluminum, etc., its superiority is demonstrated. The melting speed is fast, the element burning loss of the furnace material is less, and the energy-saving effect is better, reducing the casting cost.